1925 JOHNSON 1.5 HP Decals

This tank decals replica is been made from an old Johnson SEA HORSE "SINGLE" Motor and may work in 1925.

Includes:

• Wrap around, Oiling Instructions, Starting instructions decal

Notice this decal set is made on the U.S.A. version and Canadian Version.

• J-25 (1925)

If you expect an exact decal replica, please ask to double-check the exact size and if you have available provide color hard samples to make a better match. It is really hard to provide an OEM replica due to the age of these engines.

Reads

PATENTED IN THE FOLLOWING COUNTRIES
Australia 1922 No. 10.857-23
Canada 1919-'20-'21-'24-'26
The Netherlands
Nederlandsch Octrooi
No. 14.805 & 16,784
India 1923 No 8,916
PATENTS IN THE OTHER FOREIGN COUNTRIES

Japan
許特國再木日

1924 No 71,796
1928 No 75,168

UNITED STATES
1916-1,188,523
1916-1,207,761
1917-1,228,400
1918-1,262,692
1918-1,279,750
1923-1,459,724
1923-1,467,641
1924-1,490,112
1925-1,567,512
1926-1,606,424

OTHER PATENTS PENDING

STARTING AND OILING INSTRUCTIONS
Mix thoroughly in clean ca 1/2 pin Gargoyle Mobiloil "A" or heavy oil of a similar body with each gallon of gasoline. Gas tank capacity 4 pints. Open tank valve (handle down). Open needle valve 1 1/2 turn. Place magneto lever over left corner of steering rail. Choke by placing throttle lever clear down. Press float pin on carburetor until gasoline runs over. When motor starts move spark lever to right and slowly raise throttle lever to center. Close needle valve to point where motor runs fastest. To slow down raise throttle lever up and move magneto lever to left.