1949-1950 Johnson 5 hp decal set - Canada

Following decal set includes:

• Starting/Oiling Instructions
• (2) Johnson side decals - Port and Stbd Side

1949 and 1950 Johnson 5 hp decal set may work on the following:

Instruction decal reads:

Oil Instruction decal reads:
MODEL TD 
5.0 O.B.C. H.P.
INSTRUCTIONS
STARTING - To start with cold motor, open gas valve and air vent. Set magneto lever at START position. Push primer 3 to 5 times. Pull starter handle. After motor starts, additional priming may be necessary. Approximate opening from both needle valves 3/4 turn from closed position. Readjust while operating motor.
*H.P. Certified at 4000 R.P.M.
OILING - Mix throughly in a clean can 1/2 pint Mobiloil AF or Mobiloil Marine Light Heavy or a high grade S.A.E. No. 40 oil with each gallon of gasoline. Refill gear case with Mobilube GX90 or any other good grade oil suitable for automotive hypoid gears meeting U.S. Army Spec. #2-105B Grade 90, every 1 to 4 weeks, depending on how much motor is used. Read the instruction book.</div>
SPARK PLUG - USE CHAMPION J-6-J.
When shipped, this motor is accompanied by a bag containing tools and an instruction book.
JOHNSON MOTORS, PETERBOROUGH, CANADA