1975 Land/Range Rover Vehicle Emission Control Information Decal

You will receive: 

• (1) Land/Range Rover Vehicle Emission Control Decal Replica

Decal Reads:

LAND ROVER
300 CU IN
RANGE ROVER E.P.A.I.
VEHICLE EMISSION CONTROL INFORMATION
LEYLAND CARS
ROVER-BRITISH LEYLAND UK LTD.
CARBURETTERS TO BE ADJUSTED IN NEUTRAL WITH AIR CLEANERS REMOVED & ENGINE AT NORMAL OPERATING TEMPERATURE. 
1. ADJUST CARB, IDLE SCREWS TO GIVE CORRECT R.P.M. IDLE USING SUITABLE AIR FLOW BALANCE METER TO GIVE EQUAL AIR FLOWS. 
2. ADJUST MIXTURE SCREWS EQUALLY FOR LEAN BEST IDLE SPEED (LEAN ANTICLOCKWISE). 3. ADJUST BOTH MIXTURE SCREWS ¼ TURN CLOCKWISE. 
4. RESET IDLE R.P.M. AS IN 1 ABOVE. 5. CHECK IDLE C.O., IF NECESSARY REDUCE TO BELOW 2-5% BY EQUALLY ADJUSTING - MIXTURE SCREWS. 
SEE WORKSHOP MANUAL FOR ADDITIONAL INFORMATION.
IDLE SPEED 850 RPM
SPARK PLUG GAP -025"
TAPPET CLEARANCE -.13" HOT
IGNITION TIMING
(VACUUM PIPE REMOVED) 11" B.T.D.C. AT 1500 R.P.M 
THIS VEHICLE CONFORMS TO U.S. E.P.A. AND CALIFORNIA REGULATIONS APPLICABLE TO 1975 MODEL YEAR NEW MOTOR VEHICLES.