2018-2023 Mercury 300 hp V8 Pro XS Color Decals Only Decal set

Decals and stripes can be custom-made with colors to match your Boat Color Theme. Please send us an email to request a specific color.

Attention: This decal set will not work for V6 outboard top cowls.

Ask for a Custom Color to match your Boat and be ready for your competition. Please provide hard samples of the color to match your Boat; We customize decals for boat dealers and Manufacturers.

To install the Mercury Pro XS engine cowling kit from Garzon Studio, follow these steps:

1. Gather the tools: paper towels or microfiber, isopropyl alcohol (70%), adhesive remover, citrus base remover, heat gun, squeegee, masking tape, plastic razor blade
2. Apply masking tape around the corners of the letters "P" and "Pro" and "XS" to serve as a guide for decal placement.
3. Use heat to remove the existing graphics, clean the area with isopropyl alcohol and remove any residue with adhesive remover.
4. Cut out the graphic to be installed and align it with the tape marks. Remove the mask and secure the edges with your finger. Repeat for both sides of the cowling.
5. Install the chaps stripes using the cowling profile and squeegee into place once satisfied with its position. Repeat for the other side.
6. Apply masking tape to the side of the cowling to serve as a guide for the 250 numbers. Remove the existing graphic, then install the new graphic and squeegee it into place.
7. Tape off the top right and bottom left corners of the round Mercury emblem to ensure proper alignment, then install the new emblem.
8. Use the blue masking tape underneath the factory graphic to serve as a guide for the bottom of the stripe and install it.
9. Optionally, replace the factory 3D Mercury emblems with the color-matching Domed M-logos ones.
10. Admire your work!