2018-2023 Mercury V8 Pro XS Complete decal set
Mercury 4.6L V8 Pro XS 200/225/250/300 hp decal set for 2018, 2019, 2020, 2021, 2022 and New FourStroke Outboards.
SEE ADDITIONAL IMAGE FOR CARBON FIBER COLOR OPTION
As low as
$241.80
Availability:
In stock
SKU
M18-V8PROXS-CDS
This decal set includes
- Chaps stripe decals top and bottom cowl
- MERCURY flat vinyl decals for the sides
- PRO XS decal set Port and Starboard
- Mercury Sticker - Rear top
- FourStroke Front decal
- Top M logo decal
- M Logo decals rear and front as flat vinyl decals
- DECAL HP PRO Rear Decal
- DECAL SET HP Carbon fiber Vinyl for each side
Decals and stripes can be custom-made with colors to match your Boat Color Theme. Please send us an email to request a Specific color other than Red.
Attention: This decal set will not work for V6 outboard top cowls.
Ask for a Custom Color to match your Boat and be ready for your competition. Please provide hard samples of the color to match your Boat; We customize decals for boat dealers and Manufacturers.
To install the Mercury Pro XS engine cowling kit from Garzon Studio, follow these steps:
- Gather the tools: paper towels or microfiber, isopropyl alcohol (70%), adhesive remover, citrus base remover, heat gun, squeegee, masking tape, plastic razor blade
- Apply masking tape around the corners of the letters "P" and "Pro" and "XS" to serve as a guide for decal placement.
- Use heat to remove the existing graphics, clean the area with isopropyl alcohol and remove any residue with adhesive remover.
- Cut out the graphic to be installed and align it with the tape marks. Remove the mask and secure the edges with your finger. Repeat for both sides of the cowling.
- Install the chaps stripes using the cowling profile and squeegee into place once satisfied with its position. Repeat for the other side.
- Apply masking tape to the side of the cowling to serve as a guide for the 250 numbers. Remove the existing graphic, then install the new graphic and squeegee it into place.
- Tape off the top right and bottom left corners of the round Mercury emblem to ensure proper alignment, then install the new emblem.
- Use the blue masking tape underneath the factory graphic to serve as a guide for the bottom of the stripe and install it.
- Optionally, replace the factory 3D Mercury emblems with the color-matching Domed M-logos ones.
- Admire your work!
Product Name | 2018-2023 Mercury V8 Pro XS Complete decal set |
---|---|
SKU | M18-V8PROXS-CDS |
Manufacturer | Mercury |
Outboard Manufacturer | Mercury |
Year | 2023, 2022, 2021, 2020, 2019, 2018 |
Horsepower | 200 hp, 225 hp, 250 hp, 300 hp |
Part # | 8M0142186,8M0142187, 8M0142199, 8M0145996, 8M0142200, 8M0145997, 8M0142201, 8M0145998, 8M0142202, 8M0145999, |
Colors | Blacks, Reds, Silvers, Grays |
Top Cover | 8M0142173, 8M0142172, 8M0142174, 8M0142175, 8M0142176, 8M0142177, 8M0143491, 8M0143492, 8M0159576, 8M0159577 |
Top Cover Color | Black Cover, White Cover |
Write Your Own Review
We found other products you might like!