Boston Whaler Logo Decals

Where are the Whaler decals placed?

Breakdown of the Whaler decal placement and size for different models:

Do you need to know where to place the Whaler decals on your boat? Here's a guide for different models:

11' Models:

• Decal size: Not specified
  Placement: 6" down from the rub rail lip to the bottom of the sled; 11" from the transom to the back of the sled
  ®: Not specified

13' Models:

• Decal size: 14 inches
  Placement: 6 inches down from the rub rail lip to the bottom of the sled; 13 inches from the transom to the back of the sled
  ®: No

• Decal size: 18 inches
  Placement: 6 inches down from the rub rail lip to the bottom of the sled; 8 inches from the transom to the back of the sled
  ®: Yes

• on a 1968 Boston Whaler 13-footer:

  1. Measure 3-7/8 inches up from the bottom edge of the boat on the port side and 10-1/2 inches from the stern edge.
  2. Place the lowest point of the decal at this measured location.
  3. The decal should be 14 inches long and dark red, as this was the original decal color for the 1968 model.
  4. 18-inch decal, which is also an acceptable size.

16/17' Models:

• Decal size: 14 inches (1962-1978), 28 inches (1979-1993)
  Placement: 8 1/2 inches down from the rub rail lip to the bottom of the sled; 13 3/4 inches from the transom to the back of the sled
  ®: No (early models), Yes (later models)

18' Models:

• Decal size: 28 inches
  Placement: 10" down from the rub rail lip to the bottom of the sled; 10" from the transom to the back of the sled
  ®: Yes

20' Models:

• Decal size: 28 inches
  Placement: 9 1/2" down from the rub rail lip to the bottom of the sled; 8" from the transom to the back of the sled
  ®: Yes

If you have any additional information on decal sizes and placement variations, please let us know.

Information Source