Boston Whaler Logo Decals
Where are the Whaler decals placed?
Breakdown of the Whaler decal placement and size for different models:
Do you need to know where to place the Whaler decals on your boat? Here's a guide for different models:
11' Models:
- Decal size: Not specified
Placement: 6" down from the rub rail lip to the bottom of the sled; 11" from the transom to the back of the sled
®: Not specified
13' Models:
-
Decal size: 14 inches
Placement: 6 inches down from the rub rail lip to the bottom of the sled; 13 inches from the transom to the back of the sled
®: No -
Decal size: 18 inches
Placement: 6 inches down from the rub rail lip to the bottom of the sled; 8 inches from the transom to the back of the sled
®: Yes -
on a 1968 Boston Whaler 13-footer:
- Measure 3-7/8 inches up from the bottom edge of the boat on the port side and 10-1/2 inches from the stern edge.
- Place the lowest point of the decal at this measured location.
- The decal should be 14 inches long and dark red, as this was the original decal color for the 1968 model.
- 18-inch decal, which is also an acceptable size.
16/17' Models:
- Decal size: 14 inches (1962-1978), 28 inches (1979-1993)
Placement: 8 1/2 inches down from the rub rail lip to the bottom of the sled; 13 3/4 inches from the transom to the back of the sled
®: No (early models), Yes (later models)
18' Models:
- Decal size: 28 inches
Placement: 10" down from the rub rail lip to the bottom of the sled; 10" from the transom to the back of the sled
®: Yes
20' Models:
- Decal size: 28 inches
Placement: 9 1/2" down from the rub rail lip to the bottom of the sled; 8" from the transom to the back of the sled
®: Yes
If you have any additional information on decal sizes and placement variations, please let us know.
Loading ...
Load More ...