Boat Stainless Steel Sliding Swim Ladders Suggested Care & Maintenance SR-505

You will receive:

• (1) Suggested Care & Maintenance Decal

Label Reads:

STAINLESS STEEL SLIDING SWIM LADDERS SUGGESTED CARE & MAINTENANCE

AFTER EACH USE:
Fully extend ladder and thoroughly rinse all ladder and slide surfaces with fresh water. Pay special attention to flushing any debris and saltwater from the slide areas.

MONTHLY:
Examine the ladder slide grooves and remove any foreign particles lodged within the grooves.
Wash entire ladder, using ONLY a clean, soft cloth, and mild soap solution. Rinse thoroughly with fresh water. To prevent damage NEVER USE ABRASIVES or ABRASIVE CLEANERS!

Allow ladder to dry after washing. Apply a light coating of spray lubricant or clear silicone grease to the slide areas ONLY Work ladder back and forth to assure distribution of lubricant and ease of operation.
CAUTION - TO PREVENT THE POSSIBILITY OF PERSONAL INJURY, ENSURE THAT ANY LUBRICANT IS CLEANED FROM LADDER RUNGS AND STILES PRIOR TO USE.
Inspect the ladder for damage and check the security of all fasteners. Repair damage and/or tighten any hardware that may have become loose prior to use.

MRP 1573112                      SR-505

*WE ONLY GUARANTEE A DECAL REPLICA IF THE CUSTOMER PROVIDES PAPER TRACES, COLOR HARD SAMPLES, MEASUREMENTS, AND PICTURES. THEY NEED TO BE SENT PREVIOUSLY OR IMMEDIATELY, FOLLOWED BY THE ORDER TO MAKE A MATCH.*